 
|
|
|
Pressure Reducing Valves 200P
The valve is a kind of adjustable direct acting pressure
reducing valve. It is diaphragm type and hydraulically operated,
and can be installed horizontally and vertically into pipeline
for water supply, fire fighting etc. Its outlet pressure can
be controlled to a relatively fixed valve under certain flow
range. The valve is used as pilot valve for our hydraulic
control valves whenever it is required.
Specifications:
Valve size: DN15-DN50
Pressure rating: PN10, PN16
Seat pressure: 1.1MPa, 1.76MPa
Body pressure: 1.5MPa, 2.4MPa
Outlet pressure: 0-0.5MPa
|
|
|
Angle
Type Pre-determined Level Control Valve 100A
Angle Type Pre-determined Level Control Valve is comprised of
an angle type diaphragm main valve, which includes a reinforced
Nylon diaphrgm and a spring. The main valve reproduces operation
of connected float ball valve. When water reaches high level,
the float ball valve will close first, then the main valve will
close. When water level drops, the float ball valve will open
again, and the main valve will open consequently.
Specifications:
Valve size: DN15-DN150
Pressure rating: PN6
Max. working pressure: 0.6MPa
Seat pressure: 0.66MPa
Body pressure: 1.5MPa
Flange pressure: PN10 |
|
|
Angle
Type Diaphragm Drain Valve100S
Angle Type Diaphragm Drain Valve is suitable to be used at water
treatment plant for draining sludge and waste water from pool
or tank. The valve is angle type and includes a reinforced Nylon
diaphragm for long-term use.
There is a hole at cover of the valve, through which, operation
medium (gas or water) will flow into control chamber (between
diaphragm and cover) of the valve from out connecting control
pipeline and solenoid valve (for gas or water) to implement
open or closing operation. Meanwhile the solenoid valves can
be put respectively or collectively into outdoor water proof
boxes, and compressed air or water will be filtrated to ensure
the valves' long service life.
Specification:
Valve size: DN15-DN300
Pressure rating: PN2.5, PN6
Max. working pressure: 0.25MPa, 0.6MPa
Seat pressure: 0.27MPa, 0.66MPa
Body pressure: 1.5MPa
Flange pressure: PN10 |
|
|
Flexible Strainer YSTF
Y type flexible strainer mainly comprises Y shape strainer and
flexible pipe joint, which is used at water and waste-water
pipeline of high building and factory. Normally it is installed
at inlet of pressure reducing valve, pressure relief valve,
pre-determined level control valve and/or the inlet of other
main equipment with purpose of facilitating cleaning up or disassembling
to protect valves or other main equipment under normal operation
conditions.
Specification:
Valve size: DN15-DN400
Pressure rating: PN10, PN16
pressure: 1.1MPaĦ˘1.76MPa |
|
|
